База знаний

How do I enable/disable my Iptables firewall?

To start IP tables on your RedHat server,
# service iptables start

You can run the following command to stop iptabes:
# service iptables stop

It is also important to save your iptables configuration so that it is loaded again on the next reboot. This can be done by running:

# service iptables save

You can also set the iptables program to start on boot by running:
# chkconfig iptables on

  • 22 Пользователи нашли это полезным
Помог ли вам данный ответ?

Связанные статьи

Can I load balance servers that are behind a firewall?

Yes, in proxy mode your servers can live anywhere and as long as you can get to the real port you are load balancing, a firewall can be used with this service.

Hardware Firewall configuration

A Hardware Firewall is a network device that is connected upstream from a server. The Firewall blocks unwanted traffic from a server before the traffic ever reaches the server. The main advantage...

Ranges to allow through server firewall

Frontend (public) network:Ports to allow:ICMP – ping (for support troubleshooting)All TCP/UDP ports Backend (private) Network: IP block: your private IP block for server to server...

Brute Force Detection

BFD -- Brute Force Detection BFD is a shell script which parses security logs and detects authentication failures. It is a brute force implementation without much complexity, and it works in...

Configure APF Firewall

A firewall is a very good idea for a server. Though many people think that a firewall is instant protection that will do everything it really is not. A firewall will help prevent some things...

Powered by WHMCompleteSolution